Keyword

CO2 Analysers

147 record(s)

 

Type of resources

Topics

Keywords

Contact for the resource

Provided by

Formats

Update frequencies

Status

draft

From 1 - 10 / 147
  • Categories  

    The CSIRO archive of observed atmospheric CO2 concentrations at the Maquarie Island Research Station, measured with the CSIRO developed LOFLO Mk2 instrument. LOFLO is an analysis system built around a commercial LI-COR 6251 optical bench which utilizes NDIR (non-dispersive infrared) gas analysis technology to measure CO2 concentrations in sample air. Consuming smaller volumes of calibration gases (approx. 15ml/min) and requiring much less operator intervention, LOFLO measurements have significantly less bias than traditional NDIR measurement techniques. Measurements using LOFLO first began at Cape Grim in May 2000 and has since been expanded to other global stations with the newer improved LOFLO Mk2. Stations using LOFLO include Cape Grim, Maquarie Island, Otways Basin and Aspendale. CO2 measurements are available from the Maquarie Island Research Station for the period 1/1/05 until present, with logged data available as yearly ascii text files in hourly averaged and minutely averaged periods for CO2 concentration, standard deviation, max & min values as well as a baseline flag. Typically file size is approximately 500 KB and 12 MB for an hourly averaged and minutely averaged year of data respectively.

  • Categories  

    The CSIRO archive of observed atmospheric CO2 concentrations at the Cape Grim Baseline Air Pollution Station in North-West Tasmania, measured with the CSIRO developed LOFLO & LOFLO Mk2 instruments. LOFLO is an analysis system built around a commercial LI-COR 6251 optical bench which utilizes NDIR (non-dispersive infrared) gas analysis technology to measure CO2 concentrations in sample air. Consuming smaller volumes of calibration gases (approx. 15ml/min) and requiring much less operator intervention, LOFLO measurements have significantly less bias than traditional NDIR measurement techniques. Measurements using LOFLO began at Cape Grim in May 2000 and has now been expanded to other global stations with the newer improved LOFLO Mk2. Stations using LOFLO include Cape Grim, Maquarie Island, Otways Basin and Aspendale, with logged data available as yearly ascii text files in hourly averaged and minutely averaged periods for CO2 concentration, standard deviation, max & min values as well as a baseline flag. Conditions are considered baseline when wind directions are between 190 & 280°. Typically file size is approximately 500 KB and 12 MB for an hourly averaged and minutely averaged year of data respectively.

  • Categories  

    The CSIRO archive of observed atmospheric CO2 concentrations at the Cape Grim Baseline Air Pollution Station in North-West Tasmania for the period 1976 until 2004. Measurements of atmospheric CO2 levels began in 1976 and have continued until the present day, giving an unprecedented view of the overall change in CO2 composition over the 30+ year time-frame. These started with the URAS-2T instrument until Jun 1990, continuing with the Siemens Ultramat 5E system until July 2004, followed by the LOFLO Mk2 instrument until the present day. All use NDIR (non-dispersive infrared) analysis techniques with LOFLO being CSIRO developed to make measurements consuming smaller volumes of calibration gas, requiring less operator intervention and having less bias than traditional NDIR measurement techniques. Logged data is available in a single ascii text file in hourly averaged periods containing CO2 concentration, wind speed and direction, a baseline and quality flag. Conditions are considered baseline when wind directions are between 190 & 280° bringing air from the southern ocean. The file size for the given variables is approximately 400 KB for an hourly averaged year of data, with the period from 1976-2004 being approx 11.0 MB.

  • Categories  

    The CSIRO archive of observed atmospheric CO2 concentrations at the Aspendale CSIRO Marine and Atmospheric Research division measured with the CSIRO developed LOFLO Mk2 instrument. LOFLO is an analysis system built around a commercial LI-COR 6251 optical bench which utilizes NDIR (non-dispersive infrared) gas analysis technology to measure CO2 concentrations in sample air. Consuming smaller volumes of calibration gases (approx. 15ml/min) and requiring much less operator intervention, LOFLO measurements have significantly less bias than traditional NDIR measurement techniques. Measurements using LOFLO first began at Cape Grim in May 2000 and has since been expanded to other global stations with the newer improved LOFLO Mk2. Stations using LOFLO include Cape Grim, Maquarie Island, Otways Basin and Aspendale. CO2 measurements are available from the Aspendale Air Pollution Station for the period 24/4/08 until present, with logged data available as yearly ascii text files in hourly averaged and minutely averaged periods for CO2 concentration, standard deviation, max & min values as well as a baseline flag. Typically file size is approximately 500 KB and 12 MB for an hourly averaged and minutely averaged year of data respectively.

  • Categories  

    The CSIRO archive of observed atmospheric CO2 concentrations at the Otway Basin Naylor Field (30km WNW of Peterborough) carbon-dioxide geo-sequestration site, measured with the CSIRO developed LOFLO Mk2 instrument. This study (the first of its kind in Australia) by the Cooperative Research Center for Greenhouse Gas Technologies (CO2CRC) is to monitor the trial geo-sequestration of CO2 into the depleted gas field (Naylor Field) and to observe the environmental effects to determine the viability and effectiveness of CO2 geo-sequestration. LOFLO is an analysis system built around a commercial LI-COR 6251 optical bench which utilizes NDIR (non-dispersive infrared) gas analysis technology to measure CO2 concentrations in sample air. Consuming smaller volumes of calibration gases (approx. 15ml/min) and requiring much less operator intervention, LOFLO measurements have significantly less bias than traditional NDIR measurement techniques.Measurements using LOFLO first began at Cape Grim in May 2000 and has since been expanded to other global stations with the newer improved LOFLO Mk2. Stations using LOFLO include Cape Grim, Maquarie Island, Otways Basin and Aspendale. CO2 measurements are available from the Otways Basin geosequestration site for the period 12/1/07 until present, with logged data available as yearly ascii text files in hourly averaged and minutely averaged periods for CO2 concentration, standard deviation, max & min values as well as a baseline flag. Typically file size is approximately 500 KB and 12 MB for an hourly averaged and minutely averaged year of data respectively.

  • This record describes atmospheric greenhouse data collected by a Cavity Ring-Down Spectroscopy (CRDS) analyzer (Picarro G2301, PICARRO Inc., USA) collected on RV Investigator voyage IN2015_E05. This is a trial voyage involving Geoscience, testing equipment and developing procedures, departing Hobart on the 1st May 2015 and returning to Hobart on the 5th May 2015. The Picarro G2301 atmospheric trace gas analyzer measures carbon dioxide (CO2), methane (CH4) and water (H2O) vapour in air. The analyzer is a wavelength-scanned laser-based CRDS spectrometer. The principle of operation and specifications can be found in the manufacturer's documentation link below.

  • This record describes data from the Spectronus - Trace gas analyser based on Fourier Transform Infrared spectroscopy (FTIR) collected on the Marine National Facility RV Investigator Event voyage IN2015_E01. This was a trial voyage for the RV Investigator departing Hobart on the 29th January and returning to Hobart on the 18th of February, 2015. The Spectronus - Trace gas analyser based on Fourier Transform Infrared spectroscopy (FTIR) is manufactured by Ecotech and the University of Wollongong. It makes continuous online measurements of carbon dioxide (CO2), methane (CH4), nitrous oxide (N2O), carbon monoxide (CO) and isotopologue del13C(CO2).

  • This record describes the Underway (UWY) data collected from the Marine National Facility (MNF) RV Investigator voyage IN2016_V01 titled: "HEOBI: Heard Earth-Ocean-Biosphere Interactions". The voyage took place between the 7th January to 27th of February, 2016 departing Freemantle and returning to Hobart. Standard Underway data is continuously recorded consisting of: (1) NAV: Navigation data: (dual GPS) Latitude, Longitude, Speed, Heading, course over ground, Gyros, and Doppler Log. (2) TSG: Thermosalinograph: Water Salinity, flow-rate, Temperature, Fluorescence, and pCO2. (3) MET: Atmospheric (port and starboard): Humidity, Wind speed and direction (vane and ultrasonic), Radiometer, Pyranometer, PAR, Air temperature, Air pressure, Rain, Ozone and Trace gases. Data are recorded at 5 second intervals. Near real-time data is available via the link "Visualisation tool for Underway Data." This dataset has been processed and archived within the CSIRO Oceans & Atmosphere (O&A) Information and Data Centre (IDC) in Hobart. Data is available at time intervals of 5 sec (NetCDF format), 10 sec and 5 min (ASCII format). Additional information regarding this dataset is contained in the Cruise Summary Report and/or the Data Processing Report for this voyage.

  • The CO2 measurements group is a research and data collection project carried out through the Integrated Marine Observing System (IMOS) Ship of Opportunity Underway Network facility. The CSIRO CO2 system used for this research is mounted on the Research Vessel Southern Surveyor (IMOS platform code: VLHJ) of the Australian Marine National Facility managed by CSIRO Marine and Atmospheric Research (CMAR). The dataset includes quality controlled data collceted between Jan 2008 and October 2013. The Southern Surveyor voyages where data was collected and processed are listed below in this record. These data are available via the Australian Ocean Data Network AODN and IMOS ocean portal.

  • This record describes the End of Voyage archive from the Marine National Facility RV Investigator trial voyage IN2015_E06. This is a 3-part trial voyage departing Hobart (TAS) and returning to Hobart, on the following dates: Leg 1: 5-8 October; Leg 2: 9-11 October; Leg 3: 12-16 October. Data collected includes: Underway, ADCP (75 KHz, 150 KHz), CTD, Gravity, Hydrology, Atmospheric (Absorption Photometer, Nephelometer, Ozone, Radon), Greenhouse (Picarro), pCO2, Echo Sounder (18, 38, 70, 120, 200, 333 KHz), Multibeam (EM122, EM710), XBT, TRIAXUS, USBL, Video, Acoustic Optical System (AOS). The archive for the IN2015_E06 EOV data will be held temporarily within the CSIRO Oceans and Atmosphere Data Centre in Hobart, with a permanent archive to be located at the CSIRO Data Access Portal (DAP, https://data.csiro.au/dap/). The EOV paper documentation - XBT Logs, is archived c/o the Data Centre in Hobart and the location entered in TRIM, reference "in2015_e06 Paper Documentation". The EOV data and voyage documentation are available to the O&A voyage participants via the local network.